|
|  |
| IS 122 - Installed Loudspeaker Producto disponible en breve |  |  |
|
| Datos Técnicos |
| Driver Sizes and Types |
12" woofer with 4" voicecoil + 1" Horn |
| Frequency Response (+/- 3 dB) |
90 Hz to 19 kHz |
| Frequency Response (-10 dB) |
58 Hz to 22 kHz |
| Sensitivity of loudspeaker system with passive crossover (fullspace) |
97 dB/1W/1m |
| Sensitivity of individual drivers |
97dB/1W/1m woofer, 110dB/1W/1m MF/HF |
| Coverage Pattern, nominal |
80° x 50° |
| Directivity Factor (Q) |
tba |
| Directivity Index (DI) |
tba |
| Passive Crossover point, slope and type |
LF/HF: 2500 Hz - 2.order |
| Impedance of individual drivers |
4 ohms woofer + 16 ohms HF |
| Impedance of passive crossover |
4 ohms nominal - 3,2 ohms minimal |
| Max. SPL: average and peak, measured (fullspace) |
3% THD: 117 dB SPL, 10% THD: 124 dB SPL, Peak: 131 dB SPL |
| Max. SPL: average and peak, calculated (fullspace) |
129dB SPL, Peak: 132 dB SPL |
| Power handling: RMS, program and peak (10ms) |
800 watts rms, 1600 watts program, 3200 watts peak (10ms) |
| Cabinet material |
18mm birch plywood |
| Cabinet finish |
Black acrylic enamel |
| Grille |
Painted steel Grille, 64% open, foam backing |
| Weight, with direct drive biamp module |
37kg (82 lbs) |
| Weight, with passive crossover |
37kg (82 lbs) |
| Dimensions |
H: 594 mm, W(front): 377 mm, W(rear): 182 mm, D: 416 mm |
| Rigging points |
(12) M10 threaded points |
| Side angle |
20° each side |
| Connectors |
2 Speakon® NL4, 1+/1- | |
 |
| Accesorios Recomendados |
|
 |
| Variantes |
| Product |
Article No. |
Designation |
| IS 122 SP54W120 |
502644 |
Loudspeaker 12" 2-Way Self Powered 50x40 W 120 V |
| IS 122 SP85W120 |
502645 |
Loudspeaker 12" 2-Way Self Powered 80x50 W 120 V |
| IS 122 SP54W230 |
502646 |
Loudspeaker 12" 2-Way Self Powered 50x40 W 230 V |
| IS 122 SP85W230 |
502647 |
Loudspeaker 12" 2-Way Self Powered 80x50 W 230 V |
| IS 122 B54W |
502648 |
Loudspeaker 12" 2-Way Biamp only 50x40 W |
| IS 122 B85W |
502649 |
Loudspeaker 12" 2-Way Biamp only 80x50 W |
| IS 122 X54W |
502650 |
Loudspeaker 12" 2-Way Passive Crossover 50x40 W |
| IS 122 X85W |
502651 |
Loudspeaker 12" 2-Way Passive Crossover 80x50 W | |
 |
| Medidas |
 |
| Descargar |
 |
| Descripción |
| The sound reinforcement loudspeaker system shall utilize a 12” low frequency driver with 4” voice coil and a coaxial 2”/1” mid/high frequency driver. The loudspeaker shall provide at least 97 dB sound pressure level at a distance of 1 meter when driven with 1 Watt. The maximum peak sound pressure level shall be at least 132 dB. The coverage angle of the high and mid frequency horn shall be 80 degrees horizontal x 50 degrees vertical, field rotatable or 50 degrees horizontal x 40 degrees vertical, field rotatable and shall be desingned using Mathematically Modelled Dispersion ™ technology. The backplate shall be modular and externally removable with options for direct drive through Neutrik NL4 connectors, passive crossover electronics with Neutrik NL4 connectors or an active amplified backplate, all field installable. The frequency response shall be usable in an equalized system between 58 Hz and 22 kHz, +/- 3dB. |
 |
| Más Imágenes |
 |
| Software |
 |
| |
|
 |
|