Characteristics

	12" woofer, 1" high frequency driver with CD-horn
	Extremely flat frequency response from 65 Hz up to 20 kHz (without any controller!)
	Exeptional low-distortion sound reproduction
	High max. sound pressure level (128 dB/SPL at 1 m)
	Nominal / absolute-maximum power capacity 400 / 750 Watts

Broad Dispersion Pattern for a Wide Range of Applications

	Precise directivity as from 700 Hz on with a non diffraction-edges horn
	Broad directivity (80° x 40°) for nearfield applications
	Perfect acoustical dispersion also at cluster use

12" High End speaker chassis´

	12" woofer with a rugged aluminium die-cast basket
	Vented voice coil to reduce power compression
	Extraordinarily low-distortion bass reproduction through long linear voicecoil excursion
	Coated surface diaphragm: reducing distortion, high degree of self damping, weather-proof

1"- Neodymium Ring Radiator Driver

	Deeper lower critical frequency
	Higher upper critical frequency without any partials
	Higher maximum sound pressure level and higher continuous maximum power capacity
	Minimum distortion
	Small weight

Practical Enclosure Design

	Housing geometry allows for simple clustering and use as a floor monitor
	Lateral monting points for U-brackets
	ANCRA-JUNGFALK-flight rails on the rear side
	Homogeneous baffle design without any diffraction edges
	Generously dimensioned bass reflex ports for minimum air movement noise
	Dent-proof grille with acoustic foam outside
	Tripod stand adaptor for standard 35 mm tripods
	Other colors on request

Principle, Direct Radiation, Bassreflex	2-way, passive
Sensitivity in 1 m with 1 W	96 dB/SPL
Free field frequency response, passive (internal x-over)	65 Hz - 20 kHz ± 3 dB
Free field frequency response, with controller	60 Hz - 20 kHz ± 2.5 dB
Nominal power handling	400 W
Max. power handling	750 W
Max. SPL in 1 m, 180 ms sinewave burst	128 dB/SPL
Directivity, horizontal x vertical (-6 dB)	80° x 40°
Directivity strictly maintained down to	700 Hz
Electronics
Impedance	8 Ohms
Crossover, passive (internal x-over)	1 kHz, 24 dB/oct
Protection circuit, passive	Multifuse for tweeter
Protection circuit, active	Limiter
Mechanical Specs
Housing	Multifunctional enclosure for clustering and floor monitor
Material	18 mm birch multiplex
Cabinet Surface	Painted finish
Color standard	Anthracite Grey (RAL 7021)
Color custom (add-on price)	On request
Handles	2
Stand flange	On bottom
Dampening material	Sheep´s wool
Baffle cover	Dent-proof grille, acoustic foam outside
Terminals	2 x SPEAKON; Input: +/-, linked to Through
Drivers	Coated cone, weather resistant
Woofer	12" long excursion die cast chassis
Tweeter	1" Neodymium-Special
Mounting points	2 x M10 - thread left and right, 1 x ANCRA JUNGFALK flight rails on rear
Height x width x depth	600 x 376 x 370 mm
Wheigt	63.9 lb
Mounting hardware	LH 29, LH 33, LH 36, LH 37, LH 80, CL 80, FIT 10, SR 21, LH 28 + LH 36 / CL 80 / LH 80, LH 29 + LH 36 / CL 80 / LH 80 LH 37 + LH 36 / CL 80 / LH 80
Recommended controllers	Pro C 28, Pro C 24
Recommended amplifiers	Pro A 2000
Recommended subwoofer	Pro X Sub S, Pro X Sub L
Accessories	LRH X 12/80