Advantages of a True 3Way System

	Drivers: 2" mid and 1" high frequency coaxial drivers in one common horn, 12" woofer
	Very flat frequency response from 65 Hz to 20 kHz (without controller!)
	Exeptional low distortion
	Very high sound pressure (132 dB/SPL at 1 m)
	Reduced Doppler effect at important mid frequency range
	Reproduction up to 20 kHz without partial oscillations
	Rated power / absolute maximum power 450 / 800 W

Optimized Sound Dispersion

	Precise sound directivity from 600 Hz with large 2" horn
	Ideal angle of dispersion (60° x 40°) for midthrow applications
	Perfect sound coverage when clustering
	No acoustic interference due to coaxial design of HF and midrange drivers

State-of-the-Art Driver Technology of 12" woofer

	Extra strong die-cast aluminum basket
	Rear vented voice coil design for minimal power compression
	Minimum LF distortion through extremely long excursion
	Surface coatet cone meaning: reduced distortion, high internal damping, wheather resistance

Advantages of a 2"/1" coaxial design vs. one 2" or 1.5" driver

	Lower LF frequency of midrange driver (650 Hz)
	Higher HF frequency of tweeter (20 kHz)
	Higher sound pressure levels and higher continuous load capacity
	Less distortion
	Less weight with neodymium magnets

Intelligent Enclosure Design

	Flexible flying point mounting with ANCRA-JUNGFALK fittings
	No limitation for high stacking with flying points on sides
	Special enclosure design ensures minimum horizontal distance between clustered loudspeakers
	Homogeneous baffle design without diffraction edges
	Large rounded bass reflex ports avoiding air noises
	Sturdy metal grill protecting drivers, with option of acoustic foam behind or in front of grille
	Built in steel stand fitting, 35 mm
	Other colors optional, on request

Acoustical
Principle, Direct Radiation, Bassreflex	3-way, passive
Sensitivity in 1 m with 1 W	97 dB/SPL
Free field frequency response, passive (internal x-over)	65 Hz - 20 kHz ± 3 dB
Free field frequency response, with controler	60 Hz - 20 kHz ± 2.5 dB
Nominal power handling	450 W
Max. power handling	800 W
Max. SPL in 1 m, 180 ms sinewave burst	132 dB/SPL
Directivity, horizontal x vertical (-6 dB)	60° x 40°, tournable
Directivity, above	600 Hz
Electrical
Impedance	8 Ohms
Crossover, passive (internal x-over)	900 Hz, 18 dB/oct
Protection circuit, passive	Multifuse for tweeter
Protection circuit, active	Limiter
Mechanical
Material	18 mm birch multiplex
Cabinet Surface	Painted finish
Color standard	Anthracite (RAL 7021)
Special (add-on price)	On request
Handles	2
Stand flange	On bottom
Dampening material	Sheep´s wool
Baffle cover	Dent-proof grille, acoustic foam inside or outside
Terminals	2 x SPEAKON; Input: +/-, linked to Through
Switch, active/passive	2 x switches
Drivers	Coated cone, weather proof
Woofer	12" long excursion die cast chassis
Tweeter	2"/1" Neodymium-Coax
Mounting points	2 x ANCRA JUNGFALK flight rails on sides, 1 x ANCRA JUNGFALK flight rails on rear
Height x width x depth	690 x 376 x 415 mm
Wheigt	83.8 lb
Accessories	LH 12, LH 29, LH 33, LH 36, LH 37, CL 80, FIT 10, SR 21, LH 28 + LH 36 / LH 12, CL 80, LH 29 + LH 36 / LH 12, CL 80, LH 37 + LH 36 / LH 12, CL 80 LRH X 12/60
Recommended controllers	Pro C 28, Pro C 24
Recommended amplifiers	Pro A 2000
Recommended subwoofer	Pro X Sub L